User Manual

Ver 3.0
1) When CD Player is on, long press the button MODE/ to turn on Bluetooth; The symbol will flash
on the LCD display.
2) Turn on the Bluetooth speaker/headset to enter pairing mode;
3) Once connected, will stop flashing
- The Pairing process may take 15s~60s
2. Car Bluetooth connection (It is not recommended to use this function in the car, because some
models may not be able to connect, it is recommended to use the FM function at this time)
1) When CD Player is on, long press the button MODE/ to turn on Bluetooth; The symbol will flash on
the LCD display.
2) Turn on the Bluetooth device, find the devise“CD player” and match the connection automatically
3) Once connected, will stop flashing
- The Pairing process may take 15s~60s
Caution: 1. Before the CD player connects to the Bluetooth device, make sure that your Bluetooth
device is not connected to other devices.
2.The CD player can only be paired with one Bluetooth device at a time. If there are multiple
Bluetooth devices around the CD player, it will randomly pair with one of them.
3.Some products may not be able to pair with CD Player due to Bluetooth compatibility
difference, you can use the Audio Cable to connect or FM transmitter to connect or FM
function.
4.When connecting a Bluetooth device, please unplug the headset, Bluetooth and headset
cannot output audio at the same time;
FAQ
1.How to turn on the player?
Please slide the power switch to ON position to playback. When a disc is played to the end the player will
enter a standby mode after 20 seconds (In the default playback mode of the boot). You can press the
button” ” to restart the player. You can also turn off the power switch and then turn on the power switch
to restart.
Note: Please turn the power OFF to reduce power loss if the CD player will no longer be used for a long
time.
2.How to connect the CD player to a car or speaker with an AUX port?
There is a 3.5mm AUX audio cable with a male plug on each end in the package. One goes into the
Headphone jack, the other plugs into alternative input.
3.Why can't the CD player play the disc?
1.Disc format is not supported, it’s just for CD, CD-R, CD-RW, and music format just support CD-DA, MP3,
WMA, Disc format and music format need to be met at the same time