Specifications

Antenna Specification
User Operations
Power On/Off
Press button once
Reset
Press button and hold for 10 seconds
System LED
Solid Green => Power On
Green Blinking => System Self Test
Red On => System Error
LED off => Power Off
Wi-Fi LED
Solid Green => Link Successfully
Green Blinking => Data Traffic TX/RX
LED Off => No Activity
RS-485 LED
Solid Green => Link Successfully
Green Blinking => Data Traffic TX/RX
LED Off => No Activity
Mounting and Installation Steps
1. Before mounting AylaIQ to your Device, ensure that your Device is disconnected from the power source.
2. Use an appropriate harness to fix AylaIQ to your device.
3. Connect the RJ45 connector from your device to the slot provided in AylaIQ.
4. Insert the power adapter’s pin to the appropriate slot in AylaIQ.
5. Reconnect your device to a power source.
6. Connect the power adapter of AylaIQ to a power source. The System LED of AylaIQ should turn green.