User's Manual

®
7 )When the headset is in the pairing mode, if you didn’t finish the pairing
process
within 2 minute, the headset will enter the standby state. If you
want to pair again, you need to repeat the steps 1)-6).
8)
If your master device is compliant to Bluetooth v2.1 specification, the
headset
may not ask password.
9) The headset supports multi-point technology, if you want to connect the
headset
to the second
Bluetooth- enabled mobile, please repeat the
pairing operation steps above. When complete pairing, turn off the
headset and then turn on again, the headset will connect to both 2 mobiles
automatically.
Wearing your headset
1. The headset is provided with an ear hook that you can use for a