Bluetooth Mono Headset User’s Manual Model ： R6360 R5 R505 R510 R515 R520 R525 R535 R550 R565 R560 R570 FCC ID:YGKR6360
Charging the battery Bluetooth has an internal, no removable, Li-Polymer rechargeable batter y. Do not attempt to remove the batter y from the device as you may damage the device. Please do not use the device while being charged. 1. For first time use, please fully charge the headset. 2. Connect the charger to a wall outlet and connects the charger cable to the charger socket. 3. While the charger is connected, the red indicator light is displayed during charging.
charger from the headset and the wall outlet. 5. The fully charged batter y can keep the power up to 4 hours of talktime. When the headset is powered on and batter y power is low, the headset will emits reminder tones every 20 seconds in the earphone, and the indicator light will turn red. Batter y information 1. Your device is powered by a Li-Polymer chargeable batter y. The full performance of a new batter y is an achieved only after two or three complete charge and discharge cycles.
unused for a long time. To prevent over discharge endangers the batter y, you are recommended to fully charge the headset ever y 2 months. Basic Operation Before you use the headset for the first time, you must pair it with your ® ® Bluetooth mobile phone or other Bluetooth devices ( The “Device”). In this user guide, we take mobile phone as the pairing object for example. Please pair according to the following steps: 1)Place the headset and the device within 1 meter distance area.
mobile user guide for details. Make the mobile to search for the Bluetooth ® device. 4) Your mobile phone will find the headset and show it on the list. 5) Select the name, after press “OK” to confirm, input the password “0000” to finish pairing. 6) When the headset is paired with mobile phone, you will hear a beep and the blue indicator light will flash 5 times quickly, and then enter the standby state.
7 )When the headset is in the pairing mode, if you didn’t finish the pairing process within 2 minute, the headset will enter the standby state. If you want to pair again, you need to repeat the steps 1)-6). ® 8) If your master device is compliant to Bluetooth v2.1 specification, the headset may not ask password. 9) The headset supports multi-point technology, if you want to connect the headset to the second Bluetooth- enabled mobile, please repeat the pairing operation steps above.
better fit on your ear. 2.To use the headset without the ear hook, plug the headset into you ear and point the headset toward your mouth. 3. To use the headset with the ear hook, insert the ear hook into the small opening at the back of the headset. 4. The headset can be worn on either the left or right ear by change the direction of the ear hook.
turns on, it will connect to the phone(s) you last connected automatically. Please ensure your phone(s)'s Bluetooth ® function is activated. Turning off the headset At any working state after the headset is powered on, press and hold MFB for about 4s, the headset will emit 2 beeps, and the red indicator will flash at the same time, the headset is powered off now. Important: When the headset has connected to 2 mobiles phones, it should be distinguished the connection sequence for some operations.
headset will turn off automatically. Head-free function Making a call-Using phone's keypad In the stand-by mode, you can dial the number on your phone(s)'s keypad to make a call. Use Voice -Dialing In the stand-by mode, press MFB briefly, you will hear a short tone from the headset, and the phone will prompt you say the voice tag which you have already attached to your contact. If the voice tag is identified by the phone, the related number will be dialed.
In a state of multi- connection is existed, the voice - dialing function is only available for phone 1. Last number re - dialing In the stand-by mode, double press MFB the last number you dialed will be re - dialed. Important: In a state of multi- connection is existed, the last number re - dialing function is only available for phone 1. Answering a call When you receive an incoming call, press the MFB shortly to answer the incoming call.
Troubleshooting If you can not connect the headset to the mobile phone, please tr y the following steps: 1)Ensure the headset is charged fully and it is paired with your mobile phone. ® 2)Ensure the headset is not connected with other Bluetooth device. 3)Ensure your mobiles Bluetooth ® feature is activated. 4)Ensure the headset is within a maximum of 10 meters of your mobile and there is no obstruction, such as walls or other electronic devices in between.
Paring state The red and alternatively blue indicator flashes In idle state after paired The blue indicator flashes 1 time every 5 seconds Incoming call The purple indicator flashes During call The blue indicator flashes once every 8 seconds Switch off The red indicator flashes 3 times Low battery The red Led flashes
Charging The red indicator keeps on Charging finished The blue indicator on SPECIFICATION Mono Bluetooth Headset Bluetooth Version: V2.1+EDR Mode: Hands Free/Headset Frequency: 2.
*Storage Temperature: -20 ℃～60℃ Battery information Your device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times, but it will eventually wear out. Unplug the charger from the electrical plug and the device when not in use. Do not leave a fully charged battery connected to a charger, since overcharging may shorten its lifetime.
charged. Battery performance is particularly limited in temperatures well below freezing. Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste. Care and maintenance · Keep all accessories and enhancements out of the reach of small children. · Keep the device dry.
· Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards. · Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics. · Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device. · Do not paint the device. Paint can clog the moving parts and prevent proper operation.
IMPORTANT REGULATORY INFORMATION This device complies with Part 15 of the FCC Rules: Operation is subject to the following conditions: 1. This device may not cause harmful interference and 2. This device must accept any interference that is received, including any interference that may cause undesired operation. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
