Phau Ntawv Qhia

1. When the device fails to con¿gure the network, please check whether the router
and WiFi password are con¿gured correctly (the device does not
support WIFI signals in the 5.8G band). After con¿rming that it is correct, you
can press and hold the reset button until the device indicator Àashes quickly,
restore the factory settings, and recon¿gure network.
2. When the software homepage shows that the device is offline, you can check
whether the device is normally powered on, and click the refresh icon in the upper
right corner to refresh.
3.The initial password of the device is admin.
Modify the device name
Modify user name
Format TF card
Share the QR code to the person
who needs to connect the device.
Restart the device
factory data reset
Note: sensitivity and alarm interval can be set
for motion detection. Click'
Ŷ
'.