RD05-WIFI Manual Appear ance Gui de Camera Togle switch/ON /OFF Reset Microphone SD-Holder USB Charge LED-Guiding Lights
Char ge Please use a 500-1000mA charger to charge the equipment. When charging, the red indicator light is always on. When it is full, the red indicator light is off.Can work while charging. Tur n on t he devi ce Press the power button to start the machine. After starting the machine, the blue indicator light flashes continuously and quickly, and the device enters the state to be connected.
2 Open your phone's WiFi list and connect to B/xCCQ...... After success, open the APP page and click AP as shown below to watch the video. Note: When there is no WiFi in the environment, AP mode can be used for connection. The effective distance of this mode is no more than 10M,which can realize localized video viewing.
3 1. First, confirm that there is available WIFI signal near the device, turn the device on, the blue indicator light flashes quickly, and the device enters the state to be connected. (Note: only support 2.4G band WIFI signal) 2.Unable to connect successfully when power is low. 3.When connecting to the network, place the device as close to the router as possible. If the nearby available WiFi signal is weak, the connection cannot be successful or the screen will be closed after successful connection. 4.
ĹClick "···" to connect to the local 2.4G WIFI band, enter the password, and then go to the next step ĻClick"Cancel" ĺClick "...
ĽClick"Next" ľYou can change the name or not, and then click “Next” ĿCheck out the video preview on the home page
4 -PDBM NPEF /VNCFS PG EFWJDF %FWJDF OJDLOBNF "EE EFWJDF SFGSFTI QBHF 4% DBSE QMBZCBDL MF .
5 Settings 1IPUP 3FDPSEJOH -JTUFO -BOETDBQF TXJUDIJOH "MBSN 4XJUDI MFGU BOE SJHIU *OEJDBUPS MJHIU 0//0'' *OGSBSFE MBNQ 0//0'' 4XJUDI VQ BOE EPXO 4IBSQOFTT TXJUDI If you need to store video content, you need to install an SD card.
Modify the device name Modify user name Format TF card Share the QR code to the person who needs to connect the device. Restart the device factory data reset Note: sensitivity and alarm interval can be set for motion detection. Click'Ŷ'. 1. When the device fails to con¿gure the network, please check whether the router and WiFi password are con¿gured correctly (the device does not support WIFI signals in the 5.8G band).