User's Manual

ManualsBrandsShenzhen Remax ManualsElectronicsRB-T11C

Bluetooth stereo headsetRB-T11C operating instructions

Basic parameter

3) power input: DC12V~28V

4) USB output: DC1/5V; 1.0A DC2/5V; 2.1A

4) 1 buttons: MFB key (also called multi function key) including: on / off / answer / hang up /

reject.

5) battery specification: rechargeable polymer battery 3.7V; 20mAh

Standby time: about 60 hours, 6 hours

7) continuous talk time: 1.5 hours

9) charging time: about 1.5 hours

10) working temperature: -10 ~ 50

11) preservation temperature: -20 ~ 80

Bluetooth parameters

1) version: Ver.3.0

2) support agreement: HSP, HFP, A2DP, AVRCP

3) Bluetooth Name:

ame::䁊

4) password: 0000

6) receiving sensitivity: -90dBm

7) frequency (Hz):2.40GHz~2.48GHz

8) distance: 10 meters (open area)

Operation mode (answering telephone)

1) boot: shutdown state, short press the multifunction key for 1 second, blue light, and

accompanied by "boot" prompt tone

Summary of content (4 pages)

PAGE 1
Bluetooth stereo headsetRB-T11C operating instructions Basic parameter 3) power input: DC12V~28V 4) USB output: DC1/5V; 1.0A DC2/5V; 2.1A 4) 1 buttons: MFB key (also called multi function key) including: on / off / answer / hang up / reject. 5) battery specification: rechargeable polymer battery 3.7V; 20mAh Standby time: about 60 hours, 6 hours 7) continuous talk time: 1.5 hours 9) charging time: about 1.
PAGE 2
(off): boot state, long press the multifunction key 3 seconds, the red light, and accompanied by "shutdown" prompt tone 3) pairing: shutdown state, short press the multifunction key one second, red and blue LED alternately flashing 4) answer the phone: Headset is not on the charging seat: when the call, short press the headset multifunction keys, accompanied by the answer tone Headset on the charging seat: when the call, pick up the headset will automatically answer the phone, accompanied by the answer to
PAGE 3
phone 2 long press the headset multifunction key to red and blue LED alternately flashing and loosening, re-enter the pairing state 3 (second) open the Bluetooth phone and search for new devices, the display on the display "Q8", according to the normal operation and headset connection 4) the first mobile phone can be connected to the headset 5) at this time the 2 mobile phone headset connected to complete Call transfer (mobile card must open this feature) In first of the mobile phone to answer the phone, se
PAGE 4
11) charging: blue light is bright 12) low battery voltage: 5 seconds flash a red light, a 5 minute alarm, and accompanied by low power prompt tone LED status (when the headset is filled) 1) when the car starts, the headset will automatically turn on the phone, the blue light flashes, the red light is always bright 2) after the headset is not connected to the phone on the phone, 10 minutes after the automatic shutdown, the red light often 3 pairs: red and blue lights flashing alternately 4) standby (not con