User's Manual

Charging voltage: 4.4V ~ 5.25V
Charging current: 300mA
Sleeping Current: 86uA
Operation Voltage: 3.3V
Product weight: 210g
Product Size: 260*83*13.5mm
Installation
·Open the gift box and pick up USB receiver from back cover of the
keyboard.
·Insert the USB Receiver into an available USB port.
·Turn on the keyboard. The keyboard will be found automatically. No further
actions are required – you are now ready to use your keyboard!
NOTE：USB cable can be used for battery charging
Connecting the receiver
Slide the receiver out from the side of keyboard, and insert to the devices
with a standard USB interface. Once connected, slide the power switch to
the "ON" position located on the left side of the unit to establish the
connection.
Touchpad
This touchpad supports multi-finger functions.
(1) When a single finger click, on behalf of the left mouse function keys
(2) When two-finger click, on behalf of the right mouse function keys
(3) When a single finger sliding pointer can be controlled
(4) When a single finger double-click, you can achieve open the file pointer is
positioned.
Auto sleep and wake up feature
The keyboard also have an auto sleep and wake up feature.Within three
minutes, if having no key pressed, the keyboard will automatically go into
sleep mode. In sleep mode, all lights extinguished state. Users can click on
any key to activate the device
Switching off the keyboard after use
After using the keyboard, push the switch to the “OFF” position. This turns
off the keyboard. The USB receiver does not need to be pulled out from the
PC. You can use it directly next time.
Charging the battery
The device uses built-in lithium-ion battery. Please use only approved data
cables and chargers.
Note: Fully charge the unit before initial operation. This device can be used
when charging, but charging time will be extended.