User's Manual

Item 6.2 : Cable Bending Strength
Conditions: Cable load at 100gram,
Testing methods: bend 60 degrees any direction from its centerline at speed of 30 cycles/min.
5000 cycles.
Result: No visible damage and no breakage in each wire.
Item 6.3 : Drop Shock with Bare Unit
Conditions: Drop the Unit from 76cm height onto floor.
Testing Methods: drop the unit on top, bottom and 4 side of the unit ( 1 time for each side).
Result: The Unit function properly, no mechanical failure.
Item 6.4 : Drop Shock in Gift box
Conditions: Unit have been packed with gift box
Testing Methods: Drop the gift box from 91cm onto a floor, on the 4 corners and 6 sides of the box
(1 time for each side)
Result: no content escape from packaging.
Item 6.5 : High Temperature Test for operating pattern
Conditions: N/A
Testing Methods: Keep the unit at the temperature of 0 to 40 degrees Celsius and relative
humidity of 0% to 95% for 25 hours and then left at ambient room temperature
for 2 hours.
Result: the unit work properly
Item 6.6 : Heat Cycle Test for Shipment Pattern
Conditions: N/A
Testing Methods: -40 degrees Celsius to 65 degrees Celsius under 0% to 90% related humidity
with total time of 40 hours, and then left at ambient room temperature for 2
hours.
Result: The unit work properly
Item 6.7 : Vibration Test
Unit shall survive a vibration within a frequency range of 10 to 200Hz at 0.015 square of g/Hz and
200 to 500 Hz at –6dB/oct for X,Y, and Z axis and 0.5 hour per aixs.
Part 7.0 : Product Compliance
Item 7.1 : Actual Compliance Label
The mouse is certified to comply with the limits for class B computing device pursuant, to subpart
of part of 15 of FCC rules and CE mark.