User's Manual

The length of the cable on receiver is 1.2 meters and the color is defined by ID.
Item 5.7 : Operating Angle
The mouse and Keyboard operation angle is 360 degrees.
Item 5.8 : Operating Distance
The Mouse and Keyboard operation distance is 1.3 Meter ( typically under normal office
environment, Mouse to Receiver set),
Item 5.9 : ID changeable
The ID is changed by the CONNECT button .
Item 5.10 Battery
5.10.1 Battery Type
The mouse and keyboard both use two AA alkaline batteries.
5.10.2 Mouse Battery Consumption
Mouse will be on sleep mode while hand off the mouse over 2 second. Mouse work again by hand
touch.
Operating mode: 32mA±10% @ 3V
Stand-by mode: 15mA ±10% @ 3V
Sleep mode: 0.08mA ±10% @ 3V
5.10.3 Keyboard Battery Consumption
Keyboard will be on sleep mode while key released over 2 second. Keyboard work again by key
pressed.
Operating mode: 8mA±2 mA @ 3V
Stand-by mode: 1.5mA ±10% @ 3V
Sleep mode: 0mA
5.10.4: Low Battery Indicator
When the mouse battery voltage is less than 2.2V, the indicator on front of the rubber wheel
should be blinking when moving the mouse.
Item 5.11 : Mouse Tracking Speed
The unit shall be capable of tracking between 50mm/s and 254mm/s of hand movement on the
matt white paper without loss of data.
Item 5.12 : LED on Receiver
The receiver unit have four LEDs
COM: Indicator for Connecting.
Num: indicator for Num Lock status
Caps: indicator for Capital Lock status
Scroll: indicator for Scroll Lock starus
Part 6.0: Reliability and environmental specification
Item 6.1 : Mouse Button Switch Activation
Conditions: 3 cycles per second.
Testing methods : a small DC motor fixed with cam automatically press the key for three time per
second. The switch is connected to a calculator. The number displayed on
calculator is pressed cycle of the key.
Result: key tested have a lift cycle of more than 1,000,000.00.