User's Manual

1/2

P/N 266-81610-2009

Installation

1. Plug the Micro receiver into a USB port of your computer.

2. Open the battery door and install battery.

Mouse Functions

Caution! Before connecting the mouse with the receiver, you need to keep the mouse at

a distance of less than 2 meters to the receiver to finish the initial connection

Trouble Shooting

1. Check Micro receiver connection; try to inserting Micro Receiver to another USB port on

your computer.

2. Connection between the mouse and the Micro Receiver. Re-insert the Micro Receiver.

Take out the battery and reinstall it.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

Quick Start Guide of

2.4GHz Wireless Mouse

PAGE 1
Quick Start Guide of 2.4GHz Wireless Mouse Installation 1. Plug the Micro receiver into a USB port of your computer. 2. Open the battery door and install battery. Mouse Functions Caution! Before connecting the mouse with the receiver, you need to keep the mouse at a distance of less than 2 meters to the receiver to finish the initial connection. Trouble Shooting 1. Check Micro receiver connection; try to inserting Micro Receiver to another USB port on your computer. 2.
PAGE 2
-Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.