User's Manual

Mouse buttons functions under Media Remote mode

Trouble Shooting

1. Check Micro receiver connection; try to inserting Micro

Receiver to another USB port on your computer.

2. Connection between the mouse and the Micro Receiver.

Re-insert the Micro Receiver. Take out the battery and

reinstall it.

P/N: 266-80971-0000

Installation

1. plug the Micro receiver into a USB port of your computer

2. Open the battery door and install

battery, this mouse can operate

with single battery, install two battery

can double the use time. turn on the

mouse, a REDbattery icon on the left

side of mouse will light On and flash 10s.

3. Install Software to take all advantage

of your mouse. Insert the CD into your computer’s CD-ROM

drive and follow on-screen instructions.

ON/OFF the mouse

1. You can switch On or shut off the mouse by use the On/OFF

switch on the bottom of the mouse

2. The Low battery indicator will flash 10s when the mouse is

Quick Start Guide of

2.4GHz Wireless Media Remote Mouse

PAGE 1
4 Mouse buttons functions under Media Remote mode P/N: 266-80971-0000 Trouble Shooting 1. Check Micro receiver connection; try to inserting Micro Receiver to another US B port on your computer. 2. Connection between the mouse and the Micro Receiver. Re-insert the Micro Recei ver. Take out the battery and reinstall it. 2. The Low battery indicator will flash 10s when the mouse is ON/OFF the mouse 1. You can switch On or shut off the mouse by use the On/OFF switch on the bottom of the mouse 3.
PAGE 2
Press the CPI button and you can toggle the CPI between 800 CPI and 1600 CPI (Laser Version, Optical is between 500 CPI and 1000 CPI) Cursor Speed control Mouse Functions turned on. If the battery icon keep flash during your using. The battery need to be replaced. Press the CPI button for over 3 seconds again and you will back to Normal Mode. In Media Remote control mode.
PAGE 3
Note: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Caution: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment.