User Manual
Installation
1. plug the Micro receiver into a USB port of your computer
2. Open the battery door and install
battery, this mouse can operate
with single battery, install two battery
can double the use time. turn on the
mouse, a RED battery icon on the left
side of mouse will light On and flash 10s.
3. Install Software to take all advantage
of your mouse. Insert the CD into your computer’s CD-ROM drive and follow on-screen instructions.
ON/OFF the mouse
1. You can switch On or shut off the mouse by use the On/OFF switch on the bottom of the mouse
2. The Low battery indicator will flash 10s when the mouse is turned on. If the battery icon keep flash during your using. The
battery need to be replaced.
Mouse Functions
Cursor Speed control
Press the CPI button and you can toggle the CPI between 800 CPI and 1600 CPI (Laser Version, Optical is between 500 CPI
and 1000 CPI)
Scrolling Side-to-side
You can scroll side-to-side by tilting the wheel left or right. This feature is especially useful in spread sheets or viewing
large-size images.
Zoom In and Zoom Out
You can use the two extra button on left size of the mouse to zoom in and zoom out your document.
To use this function, you need to install the CD Driver.
Universal Back / Forward
Use the back button to access previous page and use the forward button to access next page.
Media Remote Control Mode
Press the CPI button for over 3 seconds to enter Media Remote control Mode. the battery icon will fast flash 3 seconds when
you successful change mouse mode.
In Media Remote control mode. the mouse button and scroll will change to following function to let you remote control your
PC’s media player
Press the CPI button for over 3 seconds again and you will back to Normal Mode.
Quick Start Guide of
2.4GHz Wireless Media Remote Mouse