User's Manual




Installation
Configuration
Trouble Shooting
noituloS melborP
If your problem is not solved, please contact the helpdesk at www.rapoo.com/H3070/faq
2
A. Headset
B. Transmitter
C. USB charging cable
D. 3.5mm to USB cable
No sound at all
My friend on msn/skype does
not hear what I’m saying
Bad sound quality
Sound drop out when
changing the volume
Volume control under
wired mode
You can not rotate the
ear cover
-Before using the headset and the transmitter need to be fully charged.
-Connect the USB charging cable to the headset, the transmitter and a
computer to charge them.
-The red LED on headset or transmitter will be on when charging.
-The corresponding red LED will go off when the headset or the transmitter is fully charged.
-The corresponding red LED will blink when the headset or transmitter is low battery.
Wireless mode
-Connect the transmitter to an audio device with a 3.5mm audio hole or USB port.
-Turn on the transmitter and the headset.
-The green LED will blink and then stay on when the headset is connected.
-Make sure you have charged the headset.
-Make the headset as your default audio device.
Refer to step “5” and “10”.
-Restart the media player.
-Connect the transmitter to another USB port.
-Check if the headset is under USB mode.
-Check if the headset is set as your default device.
Refer to step “5” and “10”.
-Increase the microphone volume and increase the volume from the msn/skype software.
-Check if the headset is set as your default device on msn/skype software.
-Maximum wireless range is 8m, but walls or big objects may reduce the range.
-Move other working wireless devices away from the transmitter and headset.
-This is normal behaviour. But if it is bothering, you can use the volume control of
your media playing software.
-Please push the headband to the bottom and then rotate the ear cover to flat them.








Go to “Playback Devices” to configure the microphone .
Set the “Rapoo Wireless Audio” as your default device .
- Select the “Recording” tab .
- Double click on the “Microphone” .
Set the level to 100% .
Windows XP
Go to “Adjust Audio Properties” to configure the microphone .
- Set the “Rapoo Wireless Audio” as your default device .
- Go to the “Voice” tab.
Click on the “Volume” of the Voice recording.
Set the level to 100% .
Windows 7/ Vista
Wired mode
-Connect the headset to an audio device with a
3.5mm to USB audio cable.
Note:It is recommended to turn off the headset under
wired mode.

-Under wired mode, the volume control on the headset can not work. You can use the
volume control of your PC or media playing software.