INSTRUCTION MANUAL Before using the TV, please read this manual thoroughly, and retain it for future reference. Sar T Virtuoso Model: RNSMU7536-B LISTED “This product is manufactured and sold by Curtis International Lid RCA, the RCA logo, the two dogs (Nipper and Chipper} loge, are registered trademarks or trademarks of RCA Trademark Management and are used under license by Curtis International Lid.
English CONTENTS 4 SAFETY 1 PRECAUTION IMPORTANT 2 SAFETY 2 INSTRUCTIONS 3 ACCESSORIES 3 4 GETTING 3 STARTED Remote Control 4 CONTROL Front View 5 5 REFERENCE Side View 5 GUIDE Back View 6 8 TANTAMOUNT 7 INSTALLATION Installation 8 Antenna Connection 9 AV Connection 9 Ypres Connection 10 CONNECTIONS HDMI Connection 10 Power Cord Connection i1 Optical audio output Connection 12 Putting The Unit On A Proper Place 13 8 INITIALIZE Turning The Unit On For The First Time i3 Source Selection 13 Picture Menu 14 Sou
CONTENTS USB MEDIA PLAYER SMART TV OPERATION Display MODE Video Formats SPECIFICATION TROUBLE SHOOTING TV Symptom GUIDE WARRANTY LARD The pictures, functions and other information provided in the manual are for reference only. If it does not match the actual object, please refer to the actual product.
SAFETY PRECAUTION * CAUTION MARKING WAS LOCATED AT THE REAR PLACEMENT INFORMATION OF THE APPARATUS. DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE AVIS RISQUE DE CHOC ELECTRIC— HE PAS SOUVENIR WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TC QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFE INSTRUCTIONS 1}Read these instructions. 2¥eep these instructions. Phaedra all warnings. 4)Follow all instructions. 5)Do not use this apparatus near water, ancient only with a dry cloth. Tio not block any ventilation openings. Install in accordance with the manufacturer's instructions. 81Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (Including amplifiers} that produces heat.
ACCESSORIES Please check and Identify the supplied accessories. Remote control Battalion ooo instruction Manual Base Slant oo esr srs Base stand screws GETTING STARTED USING THE REMOTE CONTROL Point the remote control at the remote sensor located on the unit. ‘When thees is a strung ambient light source, the performance of the infrared moisture sensor ‘may be degraded, causing unreliable operation. ‘The recommended effective distance for remote operation is about 16 fas (5 meters}.
CONTROL REFERENCE GUIDE REMOTE CONTROL GEE @ HERB POWER((Y): Turns the TV on or off MUTENESS: Mute or restore the sound Number buttons: Choose the channel directly Decimal Point: Input the decimal point. Backstretch: Return to the previously-viewed channel. MENU: Access the main menu SOURCE: Select the input source mode Navigation buttons: {Up/Down/Left/Right4/ » /4 Navigate the menu OK: Confirm the selection. HOME({} ): Enter the home page. EXIT: Exit the current screen.
CONTROL REFERENCE GUIDE FRONT VIEW About remote control working distance and angle, see next page. Power/Standby Indicator: Blue and red dual-color LED, it shows red when the TV is turned off and blue when turned on. Remote Control Sensor: Remotes control IR sensor, which receives infrared ray sent by remote control. NOTE: [f thees is 2 protective film around tha serene, remove the protective film before using the TY.
CONTROL REFERENCE GUIDE BACK VIEW wwe ow ny OPTICAL: Digital TV sound output. USB: Connect the USB device such as the flash disk to access the TV media function. HDMI: (High-Definition Multimedia Interface) Provides an uncompressed digital connection. VGA: Connect the PC to these jacks. MINI Poppy: Connect the Ypres output jack of the DVD or VCR. RF: Connect to receive the signal from your antenna or cable through a coaxial cable.
WALL MOUNT INSTALLATION INSTALLING / REMOVING THE BASE STAND WARNING : The LED Display is very fragile, and must be protected at ali times when removing the base Stand. Be sure that no hard or sharp object or anything that could scratch or damage the LED display comes into contact with ii Do NOT exert pressure on the front of the unit at any time because the screen could crack. 1. Disconnect all cables or cords connected to the unit. 2.
Installation Your TV is packaged with the stand and the cabins! separated. Before using the TV, install the stand as described below, or if you want to mount tuition a wall, ses page 7 for mounting advice; the wall mount itself is not supplied. IMPORTANT! e Make sure the TV set is unplugged from the power supply before installing or removing the stand. * The TV panel may be awkward to install on your own. We recommend you ask someone 10 help with installation and/or removal of the stand.
CONNECTIONS CONNECTING ATV ANTENNA / CABLE / SATELLITE To view television channels correctly, a signal must ba received from one of the following sources: -An indoor or outdoor aerial antenna A cable system -Satellite system NOTE For receiving over-the-air TV broadcasts, we recommend that you use an external fixed antenna. Should you require the use of a temporary antenna, please ensure that you purchase an antenna with sufficient ability to receive in weak signal areas.
CONNECTIONS CONNECTING A HIGH-DEFINITION (HD) SOURCE USING COMPONENT CONNECTION High-Definition (HD) Devices with component video output must be connected to the Ypres input. Connect the component video cable and audio cable (not included) as shown. Make sure you connect the component video cable and audio cable from the other equipment (COMPONENT QUT and AUDIO QUT) to the unit COMPONENT IN.
CONNECTIONS CONNECTING THE POWER CORD You can power on your TV unit before you make sure the power cord is inserted well. Al the same time, please check that the rated voltage of your unit matches your local Voltage. NOTE = Instar the power plug fully into the socket soulless. {if the power plug is loose it pound generate heat and cause fire .} + Ensure that the prows plug is easily accessible. = Ensures the earth pln on the power plug Is securely connected to prevent electrical shook.
CONNECTIONS Connection to a Home Theater Audio System For BEST audio performance Connecting to a Home Theater System Dolby Digital can deliver optimal 2 channel terse or surround sound with five discrete full range channels plus a sixth channel for a sub woofer. Enjoy optimal sound reproduction from your system with a Dolby Digital amplifier that incorporates a digital optical input. Connect an optional digital cable directly to the television's optical audio output tc listen through all inputs except VGA.
INITIAL SETUP PUTTING THE UNIT ON PROPER PLACE When you turn on your television set for the first time, be sure to place it on a solid stable surface. To avoid danger, do not expose the TV to water, or a heat source (e.g. lamp, candle, radiator). Sa pi Do not obstruct the ventilation grid at the rear and be sure to leave sufficient gaps around the unit. TURNING THE UNIT ON FOR THE FIRST TIME After you have initially connected your TY antenna or cable, turn the television ON.
IV SETUP Picture Menu Press MENU button to display the main menu. Press «4 / B button to select PICTURE in the main menu, it will highlight the first option. Bll opi Eli Fools Sharpness ee Ele Color Temperature Picture Mode: Choose among Sports, Normal, Mild, Save and User. The following five items (Contrast, Brightness, Color, Sharpness and Tint) can be adjust only when the picture mode is set to “User” mode. Contrast: Adjust the difference between light and dark areas of the picture.
IV SETUP Sound Menu Press MENU button to display the main menu. Press « / pb button to select SOUND in the main menu, it will highlight the first option. Sel hs EEL AVL Surround Sound Video Description Bl Audio Languages DAP Sound Mode: Choose among Standard, Music, Movie, Sports and User. The value of 120Hz, 500Hz, 1.5KHz, kHz or kHz can be adjusted only when the sound mode is set to "User" mode. Balance: Control the sound balance between the right and left speaker.
IV SETUP Function Menu Press MENU button to display the main menu. Cross «4 / Bb button to select FUNCTION in the main menu, it will highlight the first option. Noise Reduction MPEG Noise Reduction Aspect Ratio CEC link setup HDM! DID Lane hems Bela oll = Ee Noise Reduction: Eliminate noise in the picture. Choices are Off, Low, Middle, High and Auto. MPEG Noise Reduction: Eliminate noise generated while converting or compressing MPEG signals. Choices are Off, Low, Middle and High.
IV SETUP Time Menu Press MENU button to display the main menu. Press « / b> button to select TIME in the main menu, it will highlight the first option. Off Time On Time Sch Clock 00:06 Time Zone Off Time: Setup the repeat mode and timer {o turn off the TV set. On Time: Setup the repeat mode and timer to turn on the TV set. Sleep Timer: Set to turn off the TV set automatically. Choices are off, 120, 180 and 240 minutes.
SETUP Option Menu Press MENU button to display the main menu. Press «4 / & button to select OPTION in the main menu, it will highlight the first option. 8 hh 08D Time Closed Caption BE Network Software Update(USB) Software Update(NetReady) Network Update information 08D Languages: Select your desired O8D language. 08D Time: Select the time to keep the OSD display on the screen. Closed Caption: Setup the function of Closed Caption. 1. CC Mode Select the CC mode.
IV SETUP Option Menu How fo connect to WIFI? Press MENU button to display the main menu. Press «4 / b button to select OPTION in the main menu, choose the Network. After pressing the OK button, select WIFE Select to WIF! sating and tum on the WIFI, select your WIFE network and enter the password, then select the Setting to connect the WIFI.
