Installation Instructions

3. Slide the Touchpad
onto the mounting plate.
Push any extra wire into
wall before sliding onto
mounting plate.
4. Drop cover behind
Touchpad.
5. Lock in cover by pressing
at these locations until
snapped into place.
6. Plug in powersupply.
Menu Guide
Dashboard
• Favorites - is a customizable collection of sensors, Z-Wave
®
devices, cameras, and
scenes that can be easily accessed from the TouchpadDashboard
Security
• History - shows event history
• Attention - shows all opened, bypassed, or troubled zones. Zones can be bypassed or
activated by pressing the toggle to the right of the zone name.
Note: Zone name and chime options can be edited by selecting a zone. User pin
authentication is required.
Devices
• Add/Remove Z-Wave devices using the “+ Add” or “- Remove” buttons in the app bar
• Lock and unlock Z-Wave door locks
• Configure Z-Wave door lock access codes
• Turn Z-Wave lights on and off
• Set dimmer level for Z-Wave dimmer switches