User's Manual

The matching methods are respectively: "1" - > "2" - > "3" - > "4 >" 5 > "6",
and the matching of the tire sensor is completed.
“5” shows 00 small wheel icon flashing, and then install the sensor #5, it will
automatically enter the matching of “6”.
“6” shows 00 small wheel icon flashing, and then install the sensor #6. If all
tires are matched successfully, the system will automatically return to the main
interface and the monitor will display the corresponding tire pressure values.
In standby interface, hold down the "Menu Key" for 3 seconds to enter the
system setting mode. Continue to short press the "Menu Key" for 8 times to
enter the time setting interface to display the current time. Short press
the "-" button to enter the time setting sub page. Through the “Menu Key”,
you can select the sub items of "hour value"> "minute ten digit value" >
"minute one digit value". After selecting the sub item to be set, short press
the "+” / ” -" button to adjust the specific value.
Time Setting:
14