User's Manual

In standby interface, hold down the "Menu Key" for 3 seconds to enter the
system setting mode. Press the "Menu Key" 3 times to enter high pressure
alarm value setting of front wheel. At this time, you can set the upper limit
value of high pressure through the "+” / “-" button. After the setting is confirmed,
press and hold the "Menu Key" to save and exit.
In standby interface, hold down the "Menu Key" for 3 seconds to enter the
system setting mode. Press the "Menu Key" 4 times to enter low pressure
alarm value setting of rear wheel. At this time, you can set the lower limit value
of low pressure through the "+” / “-" button. After the setting is confirmed,
press and hold the "Menu Key" to save and exit.
High Pressure Alarm Value Setting
of Front Wheel:
Low Pressure Alarm Value Setting
of Rear Wheel:
11