User's Guide

Before operating your laser projector, please read the “Before you Begin” section and

“Notice” section of this user’s guide.

SETTING UP THE LASER PROJECTOR

1. Remove protective lm sticker from laser aperture.

2. Insert the USB power cord into a powered USB port or use the included wall adapter

to connect to an available electrical outlet.

3. Place the Sky® Lite 2.0 on a at solid surface and aim toward desired ceiling/wall.

4. Press the power button. The nebula and laser stars will gradually illuminate

and begin moving by default.

5. To adjust the illumination angle for walls, tilt the light forward onto the secondary

support panel.

6. To turn o the light, cycle through the power button modes until the unit turns o

completely. Remove the power plug from electrical outlet.

7. Use the following buttons to control lighting eects:

Top button (eects):

• Power on

• Bluetooth compatible models:

Press and hold until ashing stops to pair

• Pulse mode

• Stars only

• Cloud only

• Power o

Middle button (rotation):

• Rotation o

• Rotation on

Bottom button (brightness):

• Normal

• Low

• High

BLUETOOTH APP PAIRING

Bluetooth compatitble models can be paired with our

BlissLights app (availble for free from the App Store

or Google Play Store). The app allows users to control

device settings from a phone or tablet, and provides

extra features such as custom nebula color modes

and many other features.

SCAN TO DOWNLOAD APP