User Manual

14 15
Fully charge the board before the first ride.
Plug the charging cable to the Charge Port of
SPECTRA
™
X.
Select the charger for your region and connect to
an indoor power source (100-240V). The Battery
Indicator Lights will indicate the current battery
level as it is charging.
Disconnect the charger when the battery is fully
charged.
WARNING
Never leave the board unattended while charging.
Push the battery latches on both sides of the
battery pack to open and remove the battery from
compartment.
Insert the battery into the skateboard’s battery
compartment. Make sure it clicks on both sides
and has locked securely.
WARNING
• ALWAYS check the battery pack and latches
before using it.
• DO NOT remove or replace the battery pack with
water on the surface.
• Never insert or remove the battery pack while it
is turned on.
• DO NOT turn on the battery pack before it has
been installed properly.
Charge the Battery Remove and Replace Battery
Pack
100%-70%
Battery Lights Descriptio n
100%
Green
Green
30%-0%Green
70%-30%
Green
EN