User's Manual

This helmet is intended for use for biking, skateboarding, inline skating. Not for motor vehicle use. The
helmet is intended to reduce the risk of injuries to the head when an accident happens but it cannot
protect against every kind of injuries. Do not make any changes to the helmet that might impair its
protective capacity. Never use stickers,glue, paint or anything else that might impair the protective
capacity of the helmet. The helmet should only be used for activities mentioned above and not for
climbing trees or other activities where the helmet could fasten. Choose a size that ts comfortably on
the head and adjust the chinstrap so that the helmet sits securely if an accident happens. The helmet
should be adjusted to t the user. The straps should be positioned so that they do not cover the ears,
the buckle should be positioned away from the jawbone,the straps and buckle should be adjusted to be
both comfortable and rm. The helmet should be positioned in the right way on the head to ensure the
intended protection is provided. lt should be placed so as to protect the forehead and not be pushed
too far over the back of the head. Make sure the buckle is positioned under the chin. lnspect the helmet
regularly and if you nd deep scratches in the shell you should discard the helmet as there is a risk that
the shell could crack in an accident. A very strong impact in connection with an accident could heve
damaged the inner impact absorbing layer. Even though the damage is not visible from outside the
helmet should be discarded. Do not use the helmet if you nd any damages on it.
WARNING