User's Manual

A. Here's an example of RGB&CCT light (supporting color RGB and color temperature CCT
adjustment). Tap the“Adjust” ，you can adjust the color, as shown in the picture 8；Tap
the ”Adjust” ，you can adjust the CCT, ,as shown in the picture 9.
B. Tape the “Music”, as shown in the picture 10 and picture 11, by entering this function, playing
music and turning on the jump switch, the light can change with the frequency of music and adjust
the atmosphere.
Note: This function only exists on the same Wi-Fi lan with mobile phones and lights.
C. Tap the “Style”, as shown in the picture 12. There are dozens of options，light will run the style
as you select.
D. Tape the “Tape”, as shown in the picture 13. The light can change the color according to the
microphone frequency of the mobile phone.
E. Tape the “Timing”, as shown in the picture 14，it can set the switch of the light in different time
periods to enrich the intellectualized control.
F. Tape the sideslip column, as shown in the picture 16，click the device MAC address，can
enter the “Device settings”，here you can Rename, Unbond , Share device, Unshare device,
Factory Reset as so on. As shown in the picture 17.
Note：Binding the device refers to the device that has been connected with the network and the
light will bound to the current login account.
Share device will sharing the bound device to other exist accounts.
Factory reset refers to restoring the current equipment to the waiting configuration network
status, and at the same time, the cloud data of the current device will be cleared.
G. Tape the sideslip column, as shown in the picture 16，click“Remote control”，you can
remote control the light. When open the “Remote control” ，the ”Music” and ”Tape” will be closed,
as shown in the picture 19.