User's Manual

Installation

Installing Entertainment Center

1. Use the template included to determine the best

location for the entertainment center.

Note: The mounting location needs to be a

flat surface.

2. Cut out the mounting hole and drill pilot holes

for the screws.

3. Mount the entertainment center using the pro-

vided screws. Make sure to tighten the screws

equally to create a waterproof seal.

Note: If the surface is uneven like wood, use

silicone to create a waterproof seal between the

uneven surface and the entertainment center.

4. Secure the Trim Ring into place.

Note: When removing the Trim Ring from the

entertainment center, place a flathead screw

driver or coin into the notch on the side of the

Trim Ring and gently pry it off.

Use Supplied Template to Cut Hole

and Make Pilot Holes for Screws

Supplied

Mounting

Screws

Trim Ring

Removal

Notch