User's Manual

Receiver: ATG -101R Earphone
1、On-off operation：
●Turn on：Keep pressing the“ " button for 1 second until the display screen
lights up to turn on.
After it turns on,1
、
if there’s a transmitter with the same ID speaking nearby
（
within about 150 meters),it will hear what the transmitter says;2
、
if there’s
a transmitter at the status of ID matching nearby (within about 2 meters),its
ID will match the transmitter’s ID automatically,.
●Turn off
：
Keep pressing the “ ” button for 1 second to turn off(The display
screen turns off too).You can also use the transmitter’s function “ Click one
button to turn off all the receivers”to turn off the receiver.
2、Volume adjustment:
Click the “+”、“-”button to adjust the volume. You can hear the prompt tone if the
signal is lost,and it continues until it enters the power saving mode,you can click
any button to turn it off. Note: There will be no prompt tone if the transmitter
is turned off to lose the signal.
Attention:
1
、
When the transmitters and receivers are not used for a long time,please charge them once