User's Manual

blue light will turn to stable blue light,now the channel matching is

finished.Then you can click the transmitter’s “M" button to quit the

channel matching status,now if the transmitter speaks,the receivers can

hear it.

、

The input holes:

There’s an MIC input hole for microphone at the right side of the

transmitter,and there’s an AUX audio input hole at the bottom

，

the

transmitter will check these two input holes, and it will turn itself

off automatically if it finds no plug in the input holes within 6 minutes.

Note: Please don’t mix the two holes,if you put the microphone into the

audio input hole,the microphone will not speak.

6、Use two transmitters at the same time in one group:

This product allows two transmitters to work at the same time or take

turns to work in one group(That means that it allows two persons to speak

at the same time or take turns to speak,and all the listeners with

receivers can hear).If you need to use two transmitters in one group,when

you turn on the transmitters,you have to turn on one transmitter first,and

then turn on the other one after the first one is turned on,don’t turn

on both of them at the same time.( The first letter is “M” on the

display screen of the transmitter turned on first,and the first letter

is “S” on the display screen of the transmitter turned on secondly).If

the first letter is “M” on the display screen of both

transmitters,please turn off one of the transmitters and then turn it

on again,otherwise you can hear only one of the transmitters’voice.