User's Manual

ManualsBrandsShenzhen Qi Xin Chuang Zhan Technology ManualsComputers & AccessoriesWireless Voice Transmission Device

User manual: EXD-101T

Transmitter: EXD-101T Microphone

1、On-off operation：

●Turn on：Keep pressing the“M" button for 1 second to turn on,and insert the

microphone to speak.

●Turn off

：

Keep pressing the “M” button for 1 second to turn off.

2、Mute function and operation

Under the working condition,click the “ ”button,the transmitter will be

mute,the antenna icon “ ”on the screen will be flashing,and the receiver can

not receive the signal from the transmitter anymore; And click again the

“ ”button,the antenna icon “ ”on the screen will not be flashing,and the

receiver can receive the signal from the transmitter again.

3、Click one button to turn off all the receivers

Under the working condition,,keep pressing the“ ” button for about 5 seconds

until the screen is flashing,and all the receivers will be forcibly turned off。

Summary of content (7 pages)

PAGE 1
User manual: EXD-101T Transmitter: EXD-101T Microphone 1、On-off operation： ●Turn on：Keep pressing the“M" button for 1 second to turn on,and insert the microphone to speak. ●Turn off：Keep pressing the “M” button for 1 second to turn off.
PAGE 2
（Note: Now you can click any button of the transmitter to quit or keep pressing the “M”button to turn off. 4、The person in charge of the devices needs to know how to set the channel: (1) Why and when need to set the channel: 1, When there are two or more groups using the devices at the same location,to avoid the interference between the groups,you need to set different channels for the devices (including both transmitters and receivers) of different groups.
PAGE 3
blue light will turn to stable blue light,now the channel matching is finished.Then you can click the transmitter’s “M" button to quit the channel matching status,now if the transmitter speaks,the receivers can hear it.
PAGE 4
Receiver: ATG -680R，ATG-681R,ATG-688R 1、On-off operation： ●Turn on：Keep pressing the“ lights up to turn on.
PAGE 5
Receiver: ATG -101R Earphone 1、On-off operation： ●Turn on：Keep pressing the“ lights up to turn on. " button for 1 second until the display screen After it turns on,1、if there’s a transmitter with the same ID speaking nearby （within about 150 meters),it will hear what the transmitter says;2、if there’s a transmitter at the status of ID matching nearby (within about 2 meters),its ID will match the transmitter’s ID automatically,.
PAGE 6
every 3 months,so that the batteries can be protected. (There is lithium battery inside the device, if it was not used or charged for a long time,the battery would be damaged.) 2、If the devices are the first time used for the tour companies or the tourist attractions,please reset a relatively complicated channel number for them(don’t use the default channel), so that the crosstalk problem caused by the same channel used by different tourist teams in the same place can be avoided.
PAGE 7
FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.