User's Manual

1、 Wireless ID setting:
● The ID setting of transmitter: Turn off the transmitter,insert the
microphone,keep pressing the " " button by your right hand, and then press
the " M " button for 2 seconds by your left hand to turn on the transmitter,and
the right hand leaves the button when you see the ID number is changing.Now
you have entered the ID setting mode,you can then click the " " or "
" button to change the ID number,and then click the "M" button to confirm
it,now it has entered the wireless transmitting status of ID matching.(Now
the ID number is flashing,and it shows the antenna " " icon and the power
status icon).Now we can put the transmitter aside and continue to do the
wireless ID setting of the receivers:
● The wireless ID setting of receivers: Turn off the receiver,insert the
earphone,keep pressing the " " button by your left hand ,and then
press the " " button for 2 seconds by your right hand to turn on the
receiver,and the left hand leaves the button when the ID number shows
"00",now the receiver has entered the wireless ID receiving mode,and its
ID number will change to the same one as that of the transmitter's .(This
step must be done under the condition that the transmitter is at the
wireless transmitting status of ID matching: The ID number of the
transmitter is flashing)
After the ID numbers for the transmitter and all the receivers for the
same group are set to be the same,turn off all of them,the wireless
setting process is finished.When you turn them on again,they can work
now.
2、 Manual ID setting:
● The manual ID setting of receivers: Turn off the receiver,keep
pressing the " " button by your right hand, and press the " " button for
2 seconds by your left hand to turn on the receiver,the right hand leaves the
button when the ID number is changing,now the receiver has entered the manual
ID setting mode,you can click the " " button or the " " button to change
the ID number,and then click the " " button to confirm it.Then turn it off,the
manual ID setting process is finished.