User's Manual

User manual of wireless tour guide
Transmitter: EX-100T Microphone
1、On-off operation：
●Turn on：Keep pressing the“M" button for 2 seconds to turn on.
●Turn off：Keep pressing the “M” button for 2 seconds to turn off.
2、The person in charge of the devices needs to know how to set the ID
（ID can also be understood as channel ):
(1) Why and when need to set the ID:
1, When there are two or more groups using the devices at the same location,to
avoid the interference between the groups,you need to set different IDs for the
devices (including both transmitters and receivers) of different groups.
2,When you need to add more receivers to a group,and the ID of these added
receivers is not the same as that of the devices of the group,you need to set
the ID of these added receivers to be the same as that of the group.(The ID of
the transmitter and the receivers in a group must be the same.)
(2) The ways of ID setting:
We have two ways to do this: Wireless ID setting and manual ID setting.(We will
use wireless ID setting if we have to set the ID for many receivers;And we will
use manual ID setting if we have to set the ID for only a few receivers.)