Quick Guide

U10 Printer Quick Guide
2
USB charging wire
1
3
Quick Guide
1
4
The label paper
1/3
Description of appearance and components
OPERATION INSTRUCTIONS
❶Consumable installation
❷Starting up
Press and hold the On/Off button to turn on the machine
❸ Shutdown
In the boot state, press and hold the power button for more than 3 seconds, after the
indicator lights off the key can be released, the printer shutdown.
Note: The printer will reset if the power button is held down for more than 3 seconds.
❹Paper walking (manual feeding)
a、 paper type is continuous paper
Boot state, short press a power key (release within 3 seconds) , the printer paper 5 mm；
b. paper type is black label paper or clearance paper or orifice paper
When the machine is turned on, press the power button once (within 3 seconds to
release) , the printer starts to run to the black mark/gap/orifice and stops running if it is
not black mark/gap/orifice, then the printer can not find the black mark/gap/positioning
hole error after 16cm of paper running, which can be cleared by reloading paper。
1
Paper outlet
2
On-off button
3
USB charging port
4
Indicator light
1
2
3
4