User's Manual
(Image) 0A1 Watch Operation Guide 0
Document Version V1.0 Operating instructions
8
3. Product use
3.1 Network access process of PUDU pager to the GW1
The GW1 and the pager are configured in the same network and use the same 2.4G
communication frequency
3.2 Pager binding process
1、 Confirm that the pager and robot have entered the network at the gateway side
2、 Operate on the robot side to enter the pager binding interface
3、 Double click the button of the pager, and you will see the prompt of the pager equipment
to be configured on the robot side
4、 Click the corresponding table number on the robot side and click the OK button to
complete the binding operation
3.3 Indicator light description
Indicator type Quantity Description
Power indicator 1 Power indicator on, means that the gateway has been powered on
normally and is in working state
Role indicator 1 If the role indicator is always on, it means that the gateway belongs to
the "root gateway" under Networking status
Work indicator 4 The working indicator light is always on, indicating that the
corresponding 2.4G interface is in working state