Instruction Manual

Failure checking and Battery dismantling steps
Basic Failure Possible reason Testing/Solution
Charging Charging
The machine can
´
t be turned on
The USB wire doesn
´
t plug in
the right way
Check the USB wire
and connect with
machine correct
The battery is in low power Charging
The intensity of massage is weak The battery is in low power Charging
Battery dismantling steps
1. Cut off the external power supply and remove the product shell.
2. Cut off the two power cords connected to the battery one by one.
3. Remove the battery and use insulating glue to stick to the power cord
interface.
4. Please put waste batteries in a fixed collection point.
5. Please abide by the local environmental laws to discard the battery.
Health and environmental protection
The packaging of this product should not be discarded or incinerated at will,
and should be sent to the garbage collection station.
When this product is not in use, it should not be disassembled, discarded or
incinerated at will,and should be sent to the garbage collection station.