User's Manual

17
7.2.6. Max. Grid Input Current
determine the maximum allowable current that can be drawn by the EP500Pro.
BLUETTI is not liable for any damages, injuries, or any other legal responsibility
incurred directly or indirectly from changes made to this setting.
Max. Grid Input Current: limit the Max. current of the tied grid, when the
current exceeds the preset value, EP500Pro will take charge to be the power
source of the circuit.
The value is preset at 15A.
7.2.7. Date and time & Touch Sound & Backlight Brightness
Tap each respective date and time setting in order to set the date and time
as applicable to your local time zone.
Tap to Enable/Disable touch sounds.
You may change the Backlight Brightness of the Touchscreen LCD by using
the slider on the screen.
7.2.8. Bluetooth & Wi-Fi Connection
ON and OFF icon for either function.
Bluetooth function is disabled.
18
7.3. Data
In the Data section, you may view Product Info, Inverter & Charger Info, BMS
Maintenance, and Alarm/Fault History by selecting each respective button.
7.3.1. Product Info
serial number (SN), control software version, monitoring software version,
BMS monitoring software version and display software version.
The Serial Number (SN) can also be used to pair to BLUETTI APP manually.
7.3.2. Inverter & Charger Info
19
adapter charging, DC output and AC output working status. This section can also
be accessed directly from the shortcut icon on the homepage.
7.3.3. Battery Information
the status of the battery pack. This section can also be accessed directly from the
shortcut icon on the homepage.
7.3.4. Alarm History
by the machine. User can turn to the Chapter 14 Troubleshooting to check the
corresponding solutions.
20
08. How to Recharge EP500Pro (INPUT)
The EP500Pro includes two charging ports which can be recharged in different
methods. They will be covered in three different sections according to which
port(s) are being connected.
The two ports are named as Aviation Charging Port 1 [CP1] and Aviation
Charging Port 2 [CP2].
Aviation
Port 2 (CP2)
Aviation Port 1 (CP1)
8.1. CP1 (1st Charging Port)
Pin1Pin2Pin3
Pin1:L
Pin2:N
Pin3:PE
8.1.1. Charging Method 1: From Wall Outlet (by AC charging cable)
Connect the EP500Pro from CP1 via the AC charging cable to the wall outlet