User's Manual

13
07. User Interface
7.1. Main Interface
Tip:
The LCD resistive touchscreen, recommended to press lightly with the edge of
your fingernail until it "beeps" when it registers a press. (NOTE: Touchscreen
sounds can be disabled in the Settings menu).
e f g
k
l
ih j
a
b
c
d
. Homepage
. Settings
. Data
. Alarm
. PV Charging Information
. BMS Information
. Date/Time
. DC load Information
. DC ON/OFF
. AC ON/OFF
. AC load Information
. AC Charging Information
a
b
c
d
e
f
g
h
i
j
k
l
7.2. Settings
User can customize the working mode of EP500Pro and tweak the
equipments parameters such as language, voltage, frequency, current (UPS
Tap the Settings Button on the homepage to enter the setting interface.
14
7.2.1. AC Output Voltage & Frequency
NOTE: Please check the output voltage, frequency, and other parameters
The Output frequency and voltage can only be tweaked when the AC is OFF(tap
the AC icon at homepage to turn off AC output if it`s ON).
The list of standard output voltage and frequency in 5 regions or countries. You
may tap on the screen to set the parameters as needed.
JP Output: 100V/50Hz or 60Hz
US Output: 120V/60Hz
AU Output:240V/50Hz
EU/UK Output: 230V/50Hz
7.2.2 DC Input Source
DC Input Source: EP500Pro integrates dual MPPT and separates the DC input
source into DC1 and DC2 in parallel. DC1 indicates the first group of DC input
source as the labels written on MC4 plug of PV charging cables:
pole and negative pole of the MC4 plugs.
DC1 PV+/PV-
DC2 PV+/PV-
Can be set on screen:
(Homepage - Settings - DC1/DC2 Input Source)
15
1 2 3 4
1
2
2
3
3
4
1
a, Connect your solar panels in series into PV charging cable.
b, Plug the Aviation plug into the middle input port(CP2) on EP500Pro.
7.2.3. Language Setting & ECO Mode
displayed on your EP500Pro.
ECO: When ECO is turned ON, if the AC output load is less than 30W for 4
16
7.2.4. Machine Type (for split phase setting, exclusive for 100-120V Version)
Please turn to Chapter11 for detailed installation.
7.2.5. Working Mode(Homepage - Settings - Next - Working Mode)
Tips: EP500Pro will be set as the Standard UPS Mode as default.
There are altogether four working modes you can select in settings:
Standard UPS Mode: Default working mode(Offline mode).
PV Priority Mode: Recommended for areas in stable power supply.
Time Control Mode:
for money saving.
Customized Mode: Customized the parameters for a better user experience.
Detailed UPS Mode setting please check Chapter 10 UPS.