AC200 Portable Power Station User Manual
Contents Safety instructions……………………………………………………………….01 1. Packing list………………………………………………………………. 02 2. Function introduction………………………………………………………. . .03 3. Startup and shutdown operation…………………………………………….04 4. How to use the user-friendly touch screen display…………………04 5. The operation steps of user-friendly touch screen display……. ….04 6. Charging the product………………………………………………………….07 7. Discharging…………………………………………………………… ..09 8. Application scenario …………………………………………………..09 9.
Safety instructions Please observe the following instructions to ensure safe usage: 1. Do not alter or disassemble this product. 2. Do not move during charging or using it, because the vibration and impact during 3. moving will lead to poor contact of output interface. 4. In case of fire, use dry powder fire extinguishers for this product. Do not use water fire extinguisher, which may cause electric shock. 5. Close supervision is required when using this product near children. 6.
1. Packing list No.
2. Function introduction 1. Power button 7. 12V / 25A output 2. 12V / 10A cigarette lighter port 8. 12V / 3A output 3. Type-C charging port 9. PV / car input port 4. Touchable interaction LCD display 10. AC adapter input port 5. USB output x 4pcs 11. Wireless charging x 2pcs 6. US AC output x 6pcs (EU/UK AC output x 2 pcs) Note: AC stands for alternating current. PV stands for photovoltaic(solar charging). DC stands for direct current. Car stands for automobile electric energy.
3. Startup and shutdown operation (1) Start up: short press the power button, the indicator light is on, and the machine is in standby mode. (2) Shutdown: press and hold the power button for more than 2 seconds, and the indicator light will be off and the machine shut off.
(Figure 1) a. Homepage button g. Date/Time b. Settings button h. DC load information display button c. Data button i. DC ON/OFF button d. Faults button j. AC ON/OFF button e. PV/Car charging display button k. Adapter charging display button f. BMS information display button l.
Date and time: 2000-00-00、00：00：00 Please set the "Date and time" at least once every 2 weeks. Press to configure it.
be accessed directly from the shortcut key on the main interface; ●Click the “BMS Maintenance” button, you can view the operation information of BMS, and this part can also be accessed directly from the shortcut key in the main interface; ●Click the “Fault History” button, you can view all the fault information generated by the machine. All the fault codes recorded here. According to the fault codes, return to the main interface and click the fault button to view the corresponding fault information.
(2) Charging mode 2: From the solar panels ●Choose the solar panel with working voltage DC 35V-150V. ●Connect the solar panel to the product via solar charging cable included. ●Plug and play charging: it will start charging automatically after connecting the solar panel to the product even it is off status. ● Max. current of the solar is 12A. (3) Charging mode 3: From the car lighter port ●Press the power button and connect it to the cigarette lighter port through the car charging cable.
(5) Charging mode 5: from lead acid battery ●Connect to the positive and negative poles of the battery through the provided solar charging cable(pay attention to distinguish the positive and negative poles of the battery, the red head is the positive pole, and the black head is the negative pole) . ●Enter the setting interface as shown in (Figure 2) through the display screen to set DC input source to “car mode” .The product can be used for car charging mode, with the maximum current of 8.2A.
9. Examples of loads (1) 12V / 25A, 12V / 3A, cigarette lighter port, USB and type C output port are suitable for most products in the market, but some products may trigger overcurrent protection if there is a large current impact at the moment of starting. (2) The power of electrical products used for AC output should be less than 2000W.
11. Specification Output Rated output power 2000W Low rated voltage 100-120Vac High rated voltage 220-240Vac THD ＜ 5% Efficiency ＞ 88%（R load） Overload capacity 2000W1500W, Max.
Input AC charging Car input Solar panel input voltage 100-240VAC Maximum charging voltage 58.8 VDC maximum charging power 500W input voltage 11.5V-14.4V/23V-28.8V Input current 8.2A input voltage 35V-150V Input current 12A（only 12A will be received When the current exceeds 12A） Input maximum power 700W Remarks: 1.
12. Storage and maintenance instructions (1) Please fully charge the machine before storing it. (2) Turn off all power buttons. (3) To preserve the battery liftspan, please use and recharge at least once every 6 months. (4) Ensure proper ventilation while in use or store and keep away from any combustible materials or gases. Do not stack anything on top of the unit in storage or in use. Inadequate ventilation and/or improper storing may cause damage to the unit.
capacity is less than 5%, please charge as soon as possible. (4) Ensure that the load equipment meets the power limit of the product, that is, the load power is within the maximum input range of each output interface; If the above steps still do not solve the problem, please contact the seller for help. 15.
FCC warning: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
