Wisdom Building (Face Access Control Time Attendance) User Manual Version 2.
Content 1. Matters needing attention ........................................................................................................ 3 2. Access control related diagram ..................................................................................................... 4 2.1 Product Wireframe.............................................................................................................. 4 2.2 Hardware interface description ...........................................................
1.Matters needing attention After decompressing the background compressed package, it must be stored in the root directory of the drive Dish of the computer, and the directory must not have Chinese. The computer needs to has a 64-bit system. The computer cannot open the firewall or anti-virus software (the firewall that comes with the system must also be disabled). The device and server must be on the same LNA. The current background is only compatible with Google Chrome.
2. Access control related diagram 2.
Installation height: the horizontal line where the camera is located, 1.5m above the ground. Wall punching size: 86 boxes, can be properly leaded (reserve the size of two network cables). Installation: wall-mounted. 2.
10 PIN Plug connector PIN NO. Definition Description Mark 1 NC Relay closed end 2 SS Relay common end 3 NO Relay open end 4 GND Power Ground 5 12VIN 12V input 6 WG_D1 Wigan Data1 7 WG_D0 Wigan Data0 8 XF Firefighting 9 GT Door sensor 10 GND Power Ground Adapter or other external power input When floating or high level input, the main control receives low level; when connected to GND input, the main control receives high level 2.
The access control power supply powers the facial machine and the electric plug lock . The access control power supply must be 12V. The current depends on the current of the facial machine and electric plug lock. The maximum power consumption of the face access control machine is 1.1-1.2A, and then based on the power consumption of the electric plug lock, it is decided to buy 3A or 5A power.
IP on the same network segment as the access control device. When the installer of "Microsoft Common Runtime Collection" pops up, click Next to install. The installation takes a long time, please wait patiently. Then keep it running until the command line window disappears.
Remarks: During the installation process, if there is a pop-up blocker, you need to choose to allow background installation. 3.2 Access control device connected to the background Open the "AWconfigTool" folder, run "AWConfigTool.exe", and set it in the order of the screenshot below.
⚫ If there are multiple devices, you can connect to the server in batches in the LAN device list. ⚫ After the device restarts, wait for the initialization to complete. The "IP" at the bottom of the access control device preview interface will be white, indicating that the device has successfully connected to the background.
4.Wisdom building background instructions 4.1 Admin Login Open the browser and enter the local IP address and port number (the default port number is 3000, for example: 192.168.1.166:3000). After entering the login interface, enter the account: admin password: 123456 to enter the background interface. (Note: Check the IP address of the machine, click "Start" on the computer, enter "cmd" in the bottom input box to enter the cmd interface, then enter "ipconfig", and press Enter.
4.2 Personnel ⚫ In the personnel management, select the company, click "Company Information", and then click "Add Department to add a department. Select the department in the personnel management, click "personnel information", click "add personnel" to add a single person.
Select the department in the personnel management, click "personnel information", and click the "edit" button to the right of a registered person to modify the person's information. 4.3 Area Manage ⚫ In area management, create a new area, and then add personnel. Only people added to the area can pass through the area.
4.4 Device Manage In the device management, you can view the devices connected to the background and click the "the binding area" button to bind the device to a certain area. At this time, the personnel in this area will be sent to the access control device for registration. In “Device Management” of“ Complex”, select the connected device, click “Edit”, turn on the “Advanced Settings” switch, and set the device parameters.
Device parameter description Device name: You can modify the name displayed by the device. Device restart time: When the restart time is reached, the device automatically restarts once. Living switch: "Living" means that the device only supports identification of living and non-living, and "non-living" means that the device supports identifying living and non-living. Face recognition threshold: It is recommended to keep the default parameters, which can be changed as needed.
volume increases from 0-100. Minimum face recognition threshold: It is recommended to keep the default parameters, which can be modified as required. Screen Off time：After the face is out of the device recognition area for a few seconds, the device holds the screen. The time can be adjusted by the configuration tool. Outside the screen time, the device stays on. Fill light time: During the fill light time, the device turns on the white light fill light during face recognition.
4.7 Group Setting In “Group Setting” of“Attendance”, Click "Add" to set specific attendance personnel, and you can set working days and fights. 4.8 Attendance Statistics In “Attendance Statistics” of“Attendance”, You can view attendance records, and export attendance records by month and department. 4.9 Version Manage In” Version Manage”, you can upload a new version of the access control machine, select Update, and all online devices in the background will be upgraded.
4.10 temperatureStatistics In "temperatureStatistics" of " park-templog ", You can view the company's today's temperature statistics, today's temperature abnormality proportion data, body temperature statistics, and company temperature abnormality ranking table.
4.11 TemperaturelLoglist In " temperaturelLoglist " of "park-templog" Check or export temperature measurement and flow records. In "temperaturelLoglist" of "park-templog",Click "Expand" to view or export single-person temperature measurement and log list by name and work number.
In " temperaturelLoglist " of " park-templog", Click "All" to view or export temperature log list records by area. Members display all information, non-members only display photos, temperature and time. In" temperaturelLoglist" of " park-templog ",Click "Delete" or check the flow records and click "Delete in batch" to delete or batch delete the temperature measurement flow records one by one.
CE Caution: Intended for sale and application in a business environment. Use the Product in the environment with the temperature Between -10℃ and 40℃; Otherwise, it may damage your product. Products can only be used below 2000m altitude For the following equipment: Product Name: AI Attendance Machine Brand Name: -Model No.: PWA-10-A505 Shenzhen Power-way Information Technology Co., Ltd E-mail: xujing@power-way.
FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
This equipment meets the exemption from the routine evaluation limits in section 2.5 of RSS-102. It should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.
