Instruction Manual
Equipment requirements IOS9.0 or later Android4.4 or later APP ---- Two-dimensional code： Main function description Bluetooth 5.
Chip: Realtek8762c + full touch chip Bluetooth: 5.0 Screen size: 1.3 inches full circle Screen pixels: 240 * 240 Compatible system: Android4.4 or higher, iso9.0 or higher Standby time: 20 days for normal standby, 5-7 days in use Main function interface A. Main dial interface APP side --- docking dial application market, you can download with ease The bracelet has three main interfaces, and the interface can be switched after long pressing on the main interface for three seconds.
2. Heart rate interface, blood pressure interface, blood oxygen interface Switch to the heart rate interface / blood pressure interface / blood oxygen interface and enter the detection automatically; you can also connect to the mobile app to test on the heart rate interface / blood pressure interface. If the bracelet is not worn properly or the test fails, the failure interface will be displayed.
down, and the bracelet will vibrate at the same time. Startup: key status, long press the side button to start up. 7. Music Control When the watch and mobile phone are connected, open the music control, press the play button to play the music, you can pause, the previous song, the next song. Charging method For the first time, please remove the bracelet and charge the device with the corresponding charger. When charging, the bracelet will automatically turn on.
Bluetooth connection: After the pairing is successful, the APP automatically saves the Bluetooth address of the bracelet. When the APP is opened or running in the background, it will automatically search and connect to the bracelet. Data synchronization: Manually pull down the synchronization data on the APP homepage; the bracelet can store offline data for 7 days. The more data, the longer the synchronization time, the longest is about 2 minutes.
sleep quality; sleep data only supports APP-side viewing for the time being. Note: Sleep data will only be available when you wear the bracelet to sleep. Camera control APP side --- Shake to take photos remotely; Bluetooth connection status must be guaranteed Restore device APP --- Restore Device- Section delete all history records on APP and device Precautions 1. Please avoid the bracelet from strong impact, extreme heat and exposure. 2. Do not disassemble, repair or modify the machine yourself. 3.
to the mobile phone. If it still does not work, please turn off the mobile phone Bluetooth for 20 seconds. Then restart the phone Bluetooth. Why should I wear my bracelet tightly when measuring heart rate? The bracelet uses the principle of light reflection. After the light source penetrates the skin, it collects the signal reflected to the sensor to calculate your heart rate. If you don't wear it tightly, ambient light will enter the sensor, which will affect the measurement accuracy.
& tĂƌŶŝŶŐ ^ƚĂƚĞŵĞŶƚ ŚĂŶŐĞƐ Žƌ ŵŽĚŝĨŝĐĂƚŝŽŶƐ ŶŽƚ ĞdžƉƌĞƐƐůLJ ĂƉƉƌŽǀĞĚ ďLJ ƚŚĞ ƉĂƌƚLJ ƌĞƐƉŽŶƐŝďůĞ ĨŽƌ ĐŽŵƉůŝĂŶĐĞ ĐŽƵůĚ ǀŽŝĚ ƚŚĞ ƵƐĞƌ͛Ɛ ĂƵƚŚŽƌŝƚLJ ƚŽ ŽƉĞƌĂƚĞ ƚŚĞ ĞƋƵŝƉŵĞŶƚ͘ dŚŝƐ ĞƋƵŝƉŵĞŶƚ ŚĂƐ ďĞĞŶ ƚĞƐƚĞĚ ĂŶĚ ĨŽƵŶĚ ƚŽ ĐŽŵƉůLJ ǁŝƚŚ ƚŚĞ ůŝŵŝƚƐ ĨŽƌ Ă ůĂƐƐ ĚŝŐŝƚĂů ĚĞǀŝĐĞ͕ ƉƵƌƐƵĂŶƚ ƚŽ WĂƌƚ ϭϱ ŽĨ ƚŚĞ & ZƵůĞƐ͘ dŚĞƐĞ ůŝŵŝƚƐ ĂƌĞ ĚĞƐŝŐŶĞĚ ƚŽ ƉƌŽǀŝĚĞ ƌĞĂƐŽŶĂďůĞ ƉƌŽƚĞĐƚŝŽŶ ĂŐĂŝŶƐƚ ŚĂƌŵĨƵů ŝŶƚĞƌĨĞƌĞŶĐĞ ŝŶ Ă ƌĞƐŝĚĞŶƚŝĂů ŝŶƐƚĂůůĂƚŝŽŶ͘ dŚŝƐ ĞƋƵŝƉŵĞŶƚ ŐĞŶĞƌĂƚĞƐ ƵƐĞƐ ĂŶĚ ĐĂŶ ƌĂĚŝĂƚĞ ƌĂĚŝŽ ĨƌĞƋƵĞŶĐLJ ĞŶĞƌŐLJ ĂŶĚ͕ ŝĨ ŶŽƚ ŝ
