User's Manual

14
*Note: After the QR code has been
successfully scanned, you will hear “scan
finished” and the camera will start to connect to
the router. The green LED light will continue to
flash until the Wi-Fi connection is established.
You will hear “Wi-Fi connected” when the
connection is successful. The Wi-Fi connection
information will be automatically saved. The
next time the camera is switched on, the Wi-Fi
will connect automatically. If the Wi-Fi
disconnects, a red LED light will flash.
Connect Sync Module to Wireless Router:
Tap the add device “+” button and select “Sync
Module” in “Choose Device” interface. The
screen prompts will show as follows: