User Manual

9
Language
Select the language you can understand best: English, Spanish, German, Polish, Korean, Japanese, Chinese, Portuguese, Dutch,
Finnish, Russian, Italian, Czech, Danish, French, Swedish or Greek.
Sonar Transducer Installation and Application
Before you can use SonarPhone in the water, you must understand how the sonar part of the system works (T-POD or T-BOX) so you
can use it properly.
T-POD WiFi Sonar System
Using the T-POD WiFi Sonar System is simple. Just attach the T-POD
to the end of a heavy fishing line and cast it into the water as
you would a normal float or lure. You can also read the depth and
see fish targets while you slowly reel in the T-POD or troll it
behind your boat.
IMPORTANT: Ensure that the fishing line is heavy enough and the T-POD
is well secured. Slip line techniques are not recommended because
of the higher risk of losing the T-POD. Also, be aware of power lines
and other obstacles as you cast.
Handle the T-POD Wireless Sonar Sensor only by the top antenna cover
or nose ring when it is ON. Avoid touching the bottom when active.
Take extra care not to drop the T-POD while handling. Do not try to
open your T-POD, it is permanently sealed.
Charging the T-POD
Before you first use the T-POD WiFi Sonar System you will need to
charge it.
Align the plug of the charging cable with the pins on the bottom of
the T-POD as in the following picture.
Align the USB plug of the charge cable (the longer of the two cables)
with the USB socket of the power supply device (computer, adapter,
etc.)
When charging starts the red lights inside the unit will remain O n.
When the battery is full, the indicator lights will be switch to
green.
IMPORTANT: Be sure all of the connections are DRY, water on the