User Manual

4
Sharing a T-POD or T-BOX WiFi Signal
SonarPhone Master
The owner of the T-POD or T-BOX is called the Master.
Only the Master can control the T-POD or T-BOX.
The letter M will appear on the touch control panel when you are the Master.
SonarPhone Slave
Friends who connect and share your SonarPhone signal are called slaves.
They can use the SonarPhone independently, but have some limited control.
The letter S will appear on the touch control panel when you are the Slave.
Sharing a SonarPhone signal with Friends is EASY!
Just ask the owner of the SonarPhone for their WPA password, so you can become a “SLAVE” to the owner or Master controller of the
SONARPHONE.
Start in the “Settings” of you phone or tablet. Select WiFi and see what WiFi channels are available. Highlight the SonarPhone channel
you wish to watch and select it and then add the WPA password from the Master and when it has been accepted and when you see you
are connected to the WiFi channel you simply exit the “SETTINGS” and enter SonarPhone. Hit connect now and you are good to go!
Please realize only the Master controller has complete control of all menu functions, so you will notice some menu features simply will
not function while you are a “SLAVE” to the Master of the SonarPhone signal . There is no limit to the number of “Slaves” you can have
to a Master SonarPhone signal, but without a master using the system, no slave function is available.
SonarPhone Operation
Touch Pad Functions
Note - The Real-Time View window always updates at the fastest rate possible. This view shows what is beneath, right now.