User's Guide

Turn on the Receiver Collar

- Press the ON/OFF button until the green LED light comes on.

- In normal mode, the green LED will ﬂash every 4 seconds, indicating

that the receiver collar is on and ready to receive a signal from the

remote.

Turn off the Receiver Collar

- Press and hold the ON/OFF button until the red LED light shuts off.

- This takes approximately 3 seconds. Release the On/Off Button.

NOTE

To extend battery life, please turn the receiver collar

off when it is not in use.

Function Test

We recommend you experience how the different shock levels feel on

yourself before using this with a pet. Always begin at the lowest level and

increase the level up to that with which you are comfortable.

1. Place one ﬁnger over both contact points on the training collar.

2. Hold your remote approximately 2 ft. from the training collar.

Press and hold the vibration button for 1 to 2 seconds.

You should feel continuous vibration.

3. Press the "-" button to decrease levels. Starting at level 1, press the

shock button.

4. Increase the level until the sensation begins to feel uncomfortable.