P-COLLAR 920 User Guide For cooperation:Inquiry@patpet.com For help:Support@patpet.com Follow us for more training tricks , Facebook @PatpetTech 0.3.0.02.
Please read the User Guide manual before using this product 02
Thanks for purchasing! The dog training collar is designed to let dogs enjoy safer and happier lives as well as improve their ability to live in harmony with people. WARNING Do NOT use with aggressive dogs Aggressive dogs may cause serious injury or even death for owners or bystanders. Please consult a verterinarian or cerfified trainer if you are uncertain whether this training collar is appropriate for your dog’s temperament.
CAUTION Risk of Damage to Dog’s Skin Never leave the collar on for more than 12 hours per day. Reposition the collar on your dog’s neck every 1 to 2 hours. Never connect a leash to the electronic collar as this will cause excessive pressure on the contacts. If a rash or sore is found, discontinue use of the collar until the skin has healed. If the condition persists beyond 48 hours, see your veterinarian. This product is not a toy, please keep it away from children.
Table of Contents Overview .......................................................................................................06 Product Setup ..........................................................................................07 Charge the Remote and the Receiver Collar ..........................................07 Prepare the Remote .......................................................................................08 Prepare the Receiver .......................................................
Overview Remote A. ON/OFF B. Dog 2 C. Dog 1 D. Increase shock level A B C M L K E. Decrease shock level F. Tone button D E F J G. Vibration button H. Shock button G I. Charge port H J. Shock Level Display K. Channel Display L. Battery Display I M. Indicator light C Receiver Collar A. Contact Points B. Charging Port (with cover) C. On/Off Button D. LED Indicator A B E.
Product Setup Before you use the dog training collar, you must set up the product as outlined by the below steps: 1. Charge the remote and the receiver collar. 2. Prepare the remote and turn it on. 3. Prepare the receiver collar and turn it on. 4. Test the function of the buttons before putting it on a dog. 5. Familiarize yourself with how to use the test lamp, the shock function, and screwdrivers 6.
Prepare the Remote Turning the Remote OFF and ON 1. Press and Hold ON/OFF button to turn the remote ON. 2. The LCD will light up and show the information about the current channel and battery level. If not, please charge the remote. 3. Press and Hold ON/OFF button to turn the remote OFF. Prepare the Receiver Please use the test tool to install the contact points 3 Selecting The Contact Points and The Contact spring sheet. For the best results, select the correct contact points based on your dog's coat.
Turn on the Receiver Collar - Press the ON/OFF button until the green LED light comes on. - In normal mode, the green LED will flash every 4 seconds, indicating that the receiver collar is on and ready to receive a signal from the remote. Turn off the Receiver Collar - Press and hold the ON/OFF button until the red LED light shuts off. - This takes approximately 3 seconds. Release the On/Off Button. NOTE To extend battery life, please turn the receiver collar off when it is not in use.
NOTE 1. Vibration/Shock will not transmit for more than 10 continuous seconds. To reactivate, release and re-press the button. 2. lt is not recommended to press and hold the vibration/shock button too long, as this could cause physical or psychological pain to the dog. How to Use the Test Lamp Shock Function Test 1. Turn on the receiver collar. 2. Hold the test lamp's contacts against the contact points . 3. Press the shock button and the test lamp will light up.
Pair the Remote and the Receiver Collar 1. Press the Dog 1 button of the remote . 2. Make sure the receiver collar is turned off, Press and hold the ON/OFF button on the collar for 4-5 seconds. 3. The receiver red & green LEDs will blink for about 15 seconds, which indicates that it is ready for adding and then release the button. 4. Press the remote tone and vibration buttons at the same time and hold for 2-3 seconds.
Too Loose: The receiver collar will move around the dog's neck and the contact points maybe can't contact the dog's skin. Too Tight: It may cause shortness of breath for the dog and may hurt the dog's skin. Caution: 1. Do not shave the hair on pet's neck as this may increase the risk of skin irritation. 2. The collar should not be worn for more than 12hours per day. as it may cause skin irritation when worn too long.
Device Information Product Specification Battery Type Rechargeable, lithium polymer battery Battery Life(typical use) Remote: 27 days /Receiver: 11 days Remote Waterproof Rating IEC 60529 IPX5, waterproof Receiver Waterproof Rating IEC 60529 IPX7, waterproof Operating temperature range -20~400C (-4~1040F) Charging temperature range 0~400C (32~1040F) Remote wireless power 20dBm(100mW) Wireless Range 900m (2950 feet) The unit needs to be charged in any of the following situations: 1.
Others Frequently Asked Questions Is the vibration/shock safe for my pet? While the vibration/shock is unpleasant, it is harmless to your pet. Electronic training devices require interaction and training from the owner to achieve the desired results. How old does my pet have to be before using the remote training collar? Your pet should be able to recognize basic obedience commands such as "Sit" or "Stay".Pets should be at least 6 months old before using the training collar.
How long can I continuously deliver Vibration/Shock to my pet? The maximum amount of time you can press the Vibration/Shock Button and deliver Vibration/Shock to your pet continuously is 10 seconds. After this, there's a time-out an Vibration/Shock cannot be delivered for 5 seconds. After the 5 second time-out period, the button can be pressed and vibration/shock can be delivered again. Troubleshooting Guide My pet does not respond when I press a button. - Make sure the receiver collar has been turned on.
Warranty and repair information 1-Year Warranty The original purchaser for this unit is provided with a 1-YEAR WARRANTY. The warranty begins on the date of purchase, For the first year, coverage is provided for both parts and labor on warranty repair services. After the first year, the Limited Lifetime Warranty covers parts only, and does not cover labor fees and Accessories, Accessories such as straps and batteries are covered for the first year only.
Procedure for Repair Work If the unit is malfunctioning, please refer to the 'Troubleshooting Guide" in the manual before sending it back for service. A copy of the sales receipt showing the purchase date may be required before warranty work is initiated. Please include a brief explanation outlining the problem, and include your name, address,city/state/zip code, daytime phone number, evening phone number, and email address.
Compliance FCC - USA This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. CAUTION: Modification or changes to this equipment not expressly approved by the manufacturer may void the user’s authority to operate the equipment.
- Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
T he R& D of Dog Remote Training Collar https://patpet.com/ support@patpet.
FCC Caution： This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
