User's Manual

11
1. Make sure the Remote and Receiver Collar are on paired.
2. Put the test light tool vertically on the 2 contact points, making sure
the metal wire has direct contact with the top of the 2 points.
3. Press the static button on the remote. The test light will be lighted.
The higher the static level is the redder the light will be.
Note: For dog with shorter coats use 2pcs contact points and install
the conductive silicone caps onto the contact points to make it softer,
it may be better for your dog’s skin. For dog with thicker coats,
please install contact spring sheet.
How to Use Test Light Tool