Assembly Instructions

7
Charging the Camcorder
In case of low battery, the camcorder will give out a prompt tone 『Low
battery , please charge in time』. The responses of the controller
buttons may slow down in case of low battery. After the battery is used
up, the indicators will be off after the buttons are pressed.
Charging the camcorder and the controller
❶ Take out the Type-C USB cable from the package.
❷ Insert one end of the USB cable into a 5V/2A charger(Optional) or
a computer, and insert the other end into the Type-C USB port at
the bottom of the camcorder.
❸ The red indicator is solid while charging, and it will go out after the
battery is fully charged.
★Required charging time:
Camcorder: 0.5 hour Controller: 0.5 ~ 1 hour
●In case of low battery, the speaker will give out a prompt tone “Low
battery! Please recharge it immediately”.
●Don’t use any USB cable other than the accessories to avoid f
aults, overheating, or accidents like fire, electric shock.
●If charging is performed by connecting a computer, it cannot be
guaranteed that the product is recharged continuously if the
computer is in standby status.
●If a charger is used, it must be a domestic regular one of 5V/2A.
●Do not operate the product for a long time while it’s being char
ged.
●Do not place the space extrusion when the camera is charged,
such as the camera's optional storage bag.