USER MANUAL Wireless CarPlay Adapter Model: U2-AIR English
CONTENT How to check a car has CarPlay or not....4 What's in the box...................................5 Connection diagram...............................6 How to use wireless CarPlay...................7 Firmware update & report an issue........8 How to update or report.....................
READ ME FIRST This adapter is designed for iPhone to use Apple CarPlay wirelessly on factory car multimedia system which has built-in wired Apple CarPlay. Please refer to the next page for how to check a car has Apple CarPlay or not. However, NOT every car with built-in CarPlay could fit this adapter. If there is any issue while using the adapter, please do not hesitate to contact us.
How to check a car has CarPlay or not 1. Plug an iPhone (running iOS 10 or newer) into the car USB ports with genuine factory lightning cable. If there is a notification pop up on iPhone like below, that your car has built-in Apple CarPlay. 2. If there is a CarPlay icon in the car stereo menu, that your car has built-in Apple CarPlay. or 3. Contact your car dealer for help.
What's in the box Wireless adapter *1 USB cable (Type-C to A) *1 USB cable (Type-C to C) *1 User manual *1 5
Connection diagram Factory USB A port USB-A Type-C Adapter Factory USB C port Type-C Type-C Adapter or NOTE! The adapter should be plugged into the USB port that is for wired Apple CarPlay/Android Auto connecting if there are multi USB ports in your car.
How to use wireless CarPlay • Turn on your iPhone's WiFi and Bluetooth, then pair to the Bluetooth named "AUTO-xxxx" • Tap "Pair-Allow-Use CarPlay" on the iPhone popup notifications • It will then connect to CarPlay wirelessly after a few seconds. Bluetooth name Firmware version NOTE! Before pairing to a new iPhone, please disconnect the currently connected phone from WiFi and Bluetooth.
Firmware update & report an issue Firmware updating is NOT recommended when every function works well.
How to update or report • If your iPhone is connecting to the wireless CarPlay, enter 192.168.1.101 on iPhone's browser, next tap "Update" if there is an update available • If your iPhone could not connect to the wireless CarPlay, please join the adapter's WiFi network [AUTO-xxxx] by manual and the password is 88888888 • Next enter 192.168.1.101 on iPhone's browser, tap "Update".
FCC Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
