User Manual
iftheAPPcan’tfindyourrouterpleasecheckyoursmartphoneand
WiFiconnection.
3) PleasecheckifyougivetherightpasswordwithWiFi.
4) Please check if your router can support wireless IEEE802.11b/g /n
standard.
5) Pleasemakesureyouentertherightusernameoftheinternet.
6)
Please makesure your router security mechanism is WEP,WPA‐PSK
orWPA2‐PSK,werecommendWPA/WPA2.
7) PleasemakesureyouhaveavailableIPfortherouter,ifnotyoucan
disconnectotherdeviceandtryagain.
8) Noneoftheabove,accordingtothemanualpleaseconfigureagain.
Q3:
Why does the smart socket backlight is slowly blinking after
configure?
A3:Pleasecheckasbelow:
1) Please check if router has a specific setting, such as security
protection,usernameisrequested,passwordforconnection.
2) Wrongpassword
3) RouterDHCPisclosed.
4) Routerpreventssmartsocketconnecting.
Q4:
Whatisthedifferencebetweenconfigureandsear ch?
A4: Configure is only when you connectsmart socket to router at first
time, according to configuring smart socket can build up a connection
fromwirelessrouter.Searchisonlywhenthesmartsocketisconnected
toroutersuccessfully,foraddingnew
sock ettoyoursmartphone,ifyou
delete socket in mistake operation you can get it back fromsearching,
andyourfamilymemberscansearchsocketdirectly.
Q5:Whatisthe[APconfigure]?