Product Manual

3. Call
Start the software with network telephone function on the computer and operate the call function according to the software instructions. After the network telephone is
connected, you can have a network telephone conference with the other party.
4. Speaker volume adjustment
During a conference call, if the volume of the speaker is too low or too high, you can first press the "volume increase" or "volume decrease" button of the machine to
adjust. The volume is the maximum when the eight blue lights are all on, and the speaker is silent when the eight lights are all off. You can meet the requirements by
adjusting the appropriate volume. If you feel that it is not enough, you can adjust the volume of the speaker on the computer intelligent device.
5. Microphone mute
During a conference call, if you want to mute the local recording, press the "microphone mute" key. At this time, the 8 Red mute indicators are always on. At this time,
you can only hear the other party's voice, but the other party can't hear your voice;To cancel the mute, press the "microphone mute" key again to resume the
call. At this time, the 8 Red indicators will go out.
6. End conference call
According to the operation method of computer network telephone software, hang up the call with the other party to end the network telephone conference.