User Manual

欧米智能
III．APP installation and registration:
1.For APP download, please go to the official website of corresponding to the
mobile phone operating system to download and install it.
2.User account registration and login. This step requires the mobile phone to
be connected to the Internet, and the user account is a normal mobile phone
number .
3.Deposit recharge, car fare recharge .
IV．On/off operation instructions:
1.Turn on Bluetooth in the mobile phone system.
2.Open the APP, click the QR code button in the middle below the APP, enter
the scan QR code page, and scan the QR code with the iot controller. When the
mobile phone scans and reads the QR code information, the lock will automatically
open and enter the state of using the car.
3．When the car is used up, click close the lock, the cloud service will
automatically stop the time counting and deduct the charge after receiving the
lock.
V．The IOT controller needs to be used with a smart phone, and the mobile phone
hardware environment requires：
Android 4.3 or above, hardware support Bluetooth 4.0BLE, the best screen
resolution is 1280x720; IOS 7.1 or above, iphone 4s or above.
VI．APP page introduction