User's Manual
Table Of Contents
- 54M/150M/300Mbps
- USBWIRELESSADAPTER
- User’sManual
- (Ver2.3)
- FederalCommunicationCommissionInterferenceStat
- 1.Introduction
- 2.PackageContents:
- Warranty
- 3.Installation
- 4.WirelessConnection
- 5.TipsforWi-Fiusers
- 6.Warning
- 7.Security
- 8.Keyterms
- Wi-Fi:Shortfor“wirelessfidelity,”agenericla
- Hotspot:Aspecificgeographiclocationinwhicha
- Throughput::Theamountofdatatransmittedinas
- Bandwidth:theamountofdatathatcanbecarried
- Chipset::Agroupofmicrochipsthatexecutevario
- TxPower：Thetransmitpowermeasuredatthetermin
- 1T1R,2T2R:Thestreamchannel.1T1Rmeansonetra
- DualBand:Normallymeans802.11b/g/nor802.11a,
- 9.Specifications(Typical):
User ʼ s Manual
Wireless USB Adapte
r
Page 6
Notes:
Notes:
Notes:
Notes: Before configuring your WiFi access, you need to have your network
’
s SSID
(service set identifier), security key and authentication type handy. Check the
documentation coming with your router, ask your network administrator to get the
information.
3) If you don't see your network, click “ Refresh network list ” in the upper left corner. If you are
locating within the valid range of hotspots or wireless routers, all available networks will be
recognized and listed automatically. Click your preferred network, and then click “ Connect ”
in the lower right corner.
4) If the network security key hasn ’ t been inputted before, Windows XP prompts you to enter
the network ’ s security key to access the wanted SSID. Type the encryption key that you
wrote down earlier in both the Network key and Confirm network key boxes, and then click
“ Connect ” .
Tips:
Tips:
Tips:
Tips: If there are free hotspots, simply select the network you want from the list
displayed, then click Connecting. It tries to launch your Internet browser — you should
be connected to the Internet.
If there is a pay hotspot, signing in or up will require either to enter your login information-if
you ‘ re an existing customer, or to enter your credit card information for payment, it is just