User's Manual
Table Of Contents
- Product Introduction
- 1.1 Overview
- 1.2 Features
- 1.3 Product Diagram
- 1.4 Appearance
- 1.5 Specification
- 1.6 Interface Definition
- 1.7 Electrical Features
- 1.8 Digital Port Features
- Hardware Design Notice
- 2.1 Application Diagram
- 2.2 GPIO
- 2.3 UART
- 2.4 Design requirement of practical application
- 2.4.1 Reset Sequence
- 2.5 Power Supply Interface
- 2.6 RF Input and Output Interface
- 2.7 Dimension
- 2.8 No wiring area
- Approval and Certification
- Disclaimer
Figure 1- 4 Dimension
1.5 Specification
Table 1- 1 GWF-KM26 Specification
Protocol and Interface Standard
WiFi Standard
IEEE 802.11b/g/n
Data Interface
UART/HSPI/I2C/I2S/IR Remote Control
GPIO/PWM
I/O Interface
9 GPIO
LED
When the LED flash slow, the module is not access to WiFi.
When LED is on, the module has been accessed to WiFi.
Memory
SPI Flash
8 Mbit
WiFi Features