User's Manual

1.2 Features

Support 2.4GHz, 802.11b/g/n

Integrate Tensilica L106 low consumption 32-bit MCU, the main frequency support
80MHz and 160MHz. With RTOS.

Built-in 10-bit high-precision ADC.

TCP/IP protocol stack.

Integrate TR switch, balun, LNA, power amplifier and matching network.

With PLL, AVR and power management part, 20 dBm output power in 802.11b mode.

A-MPDU, A-MSDU,0.4 s protection interval.

Support WPA/WPA2 Security mode.

Support AT remote upgrade and OTA upgrade.

Support STA/AP/STA+AP work mode
 Support Smart-Config function（Android& iOS device）

HSPI,UART, I2C,I2S,IR Remote Control, PWM, GPIO

Deep sleep current is 10 μA , turn-off current is less than 5 μA .

Wake up, connect and transfer data in 2ms.
Figure 1- 1 GWF-KM26